
Dimensions
| Length | 10.9 in |
| Width | 6.9 in |
| Height (terminals incl.) | 7.4 in |
| Height (container) | 7.5 in |
| Weight | 48.0 lbs |
General
| Battery Technology | TPPL AGM |
| BCI Group Size | 48 |
| DIN Group Size | H6 |
| EN Group Size | LN3 |
| Warranty | 3 years |
Electrical
| Voltage | 12 V |
| Cold Cranking Amps (CCA) | 760 A |
| Pulse HCA 5sec (PHCA) | 1250 A |
| Nominal Capacity (20Hr) | 70 Ah |
| Reserve Capacity | 130 min |
| Terminal Type | SAE |
| Operating Temperature | -40°F to 140°F |
| Cycle Life at 80% DoD | 400 cycles |
Confirm your fitment
Enter your year, make, and model to get an exact match in seconds.
Find Your Battery →Daily drivers and accessory-equipped vehicles that take a BCI Group 48 (DIN H6 / EN LN3) battery. Includes start-stop equipped vehicles from 2012 onward.
Vehicles carrying real electrical loads — dash cams, parking-mode electronics, telematics, upgraded audio, and USB chargers that keep drawing after the ignition is off.
Upgrades from flooded or standard absorbed-electrolyte AGM batteries in the same Group 48 footprint, with TPPL charge recovery under parasitic loads. The ODP-AGM48 is the current version of the legacy 48-720 part number.
Cross-reference Group 98R applications per the EnerSys cross-reference — the Group 48 battery is shorter in length than the original.
Not for marine or powersport applications — the ODP-AGM48 is an automotive battery.
Owner of a vehicle that takes a BCI Group 48 (DIN H6 / EN LN3) battery who runs accessories or aftermarket electronics and wants faster recharge and charge recovery than standard absorbed-electrolyte AGM provides. Start-stop vehicle owners replacing an original-equipment AGM battery.

