
Dimensions
| Length | 13.0 in |
| Width | 6.8 in |
| Height (terminals incl.) | 9.6 in |
| Height (container) | 8.6 in |
| Weight | 69.5 lbs |
General
| Battery Technology | TPPL AGM |
| BCI Group Size | 31 |
| Warranty | 3 years |
Electrical
| Voltage | 12 V |
| Cold Cranking Amps (CCA) | 925 A |
| Pulse HCA 5sec (PHCA) | 1750 A |
| Nominal Capacity (20Hr) | 100 Ah |
| Reserve Capacity | 200 min |
| Terminal Type | 3/8-16" Stud |
| Operating Temperature | -40°F to 140°F |
| Cycle Life at 80% DoD | 400 cycles |
Confirm your fitment
Enter your year, make, and model to get an exact match in seconds.
Find Your Battery →Daily drivers and accessory-equipped vehicles that take a BCI Group 31 (stud terminal) battery.
Vehicles carrying real electrical loads — dash cams, parking-mode electronics, telematics, upgraded audio, and USB chargers that keep drawing after the ignition is off.
Upgrades from flooded or standard absorbed-electrolyte AGM batteries in the same Group 31 footprint, with TPPL charge recovery under parasitic loads. The ODP-AGM31 is the current version of the legacy 31-925S part number.
Not for marine or powersport applications — the ODP-AGM31 is an automotive battery.
Not for SAE-post Group 31/31A applications — the ODP-AGM31 uses 3/8 inch stainless stud terminals. SAE-post vehicles take the ODP-AGM31A; stud and SAE Group 31 batteries are never interchangeable.
Not for emergency vehicles (police, fire, ambulance), mission-critical uptime, or continuous-draw duty where the vehicle sits for a week or more with loads still connected — those applications take the ODYSSEY Extreme ODX-AGM31 in the same Group 31 footprint.
Owner of a vehicle that takes a BCI Group 31 (stud terminal) battery who runs accessories or aftermarket electronics and wants faster recharge and charge recovery than standard absorbed-electrolyte AGM provides.

